Welding workstation - compact module with integrated extraction

The welding workstation by Apfel is a ready-to-use complete system for two welding stations. It combines all necessary work tools to supply two fully functional welding stations within the footprint of a telephone booth – from the power connection to the W3-class welding fume extraction. The swiveling extension arms not only guide the hoses of the integrated welding fume extraction but also supply the workstations with electricity and compressed air. Ideal for welding in confined spaces without tripping hazards from cables lying around.

The most important advantages at a glance

Do these challenges in welding sound familiar to you?

Annoying welding machine

Often the welding machine has to be pulled along when working at the welding table. Especially with large or uneven workpieces, this not only stresses the body but also the nerves.

Unnecessary search and travel times

As soon as the welding wire is empty, the path leads to the storage to fetch a new roll. Alternatively, all tools and consumables are stored directly at the welding workstation, which leads to chaos.

Loud filter unit

The welding fume extraction is necessary, but even with ear protection, one cannot escape the constant buzzing of the loud filter unit – how could they, when it is directly next to them.

Trip hazards and clutter

The entire floor is covered with dirty cables and hoses that not only look untidy but also pose dangerous trip hazards. Next to the welding table are the welding machine and the filter unit, both of which need to be supplied with electricity.

SAP welding workstation: Two workstations in one system

The SAP welding workstation combines two fully functional workstations in a compact system. Two swiveling extension arms supply both sides from above with electricity, compressed air, and extraction. The floor remains clear, and the workflow remains structured.

The integrated extraction with 2.2 kilowatts is W3 certified and filters 99.9 percent of the fume particles. The cleaned air is recirculated in circulation mode. This improves air quality, protects health, and saves energy.

Overview of SAP welding workstation models

SAP welding workstation

  • Freestanding complete system for supplying two welding workstations
  • Extraction, electricity, and compressed air supply from above via the swiveling extension arms
  • With integrated welding fume extraction for steel (W3 certified with automatic filter cleaning)
  • Including tool cabinet for storing relevant work materials
  • Supplied plug-ready and ready for operation
  • Color: Frame powder-coated in anthracite grey RAL 7021 with functional elements in daffodil yellow RAL 1007,
    Item number: 2338344
  • Color: Frame powder-coated in gentian blue RAL 5010 with functional elements in daffodil yellow RAL 1007,
    Item number: 2335288
  • Price: 29,500 € net plus packaging & shipping

WGH wall mounting set

  • Wall mount as a complete system for supplying two welding workstations
  • Extraction from above via two swiveling extension arms
  • With integrated welding fume extraction for steel (W3 certified with automatic filter cleaning)
  • Optionally with electricity and compressed air supply at the extension arms
  • Including perforated sheet metal without accessories, ideally suited for use as a PC station
  • Supplied plug-ready and ready for operation
  • Color: Frame powder-coated in anthracite grey RAL 7021 with functional elements in daffodil yellow RAL 1007,
    Item number: 1001549
  • Color: Frame powder-coated in gentian blue RAL 5010 with functional elements in daffodil yellow RAL 1007,
    Item number: 1001548
  • Price: 18,500 € net plus packaging & shipping

AGA 2020 extension arm set for welding

  • For supplying all necessary incoming and outgoing lines
  • Ideal for central and mobile supply during welding work
  • Length approx. 4 meters (+ 2 m extraction hose) – special lengths available on request
  • Suitable for wall or carrier mounting
  • Solidly processed and fully swiveling in both directions
  • Including extraction hose, robot empty pipe, cable roller, compressed air roller, and hoses for supplying compressed air and gas
  • Color: Powder-coated in daffodil yellow RAL 1007,
    Item number: 2332847
  • Price: 4,850 € net plus packaging & shipping

MSL 1020 welding table

  • Mobile welding table with pneumatic height adjustment
  • System 28 (28 mm hole diameter) in diagonal grid
  • Dimensions table plate: approx. 2,000 mm (W) x 1,000 mm (D) x 200 mm (H) 
  • Height adjustment from minimum 710 mm to maximum 1,530 mm
  • Four castors with a load capacity of 1,500 kg each
  • Two drawers on each long and short side
  • Compressed air connection required
  • Color: Frame powder-coated in anthracite grey RAL 7021 with functional elements in daffodil yellow RAL 1007,
    Item number: 2338346 
  • Color: Frame powder-coated in gentian blue RAL 5010 with functional elements in daffodil yellow RAL 1007,
    Item number: 2335191
  • Price: 11,800 € net plus packaging & shipping

MSL 1224 welding table

  • Mobile welding table with pneumatic height adjustment
  • System 28 (28 mm hole diameter) in diagonal grid
  • Dimensions table plate: approx. 2,400 mm (W) x 1,200 mm (D) x 200 mm (H)
  • Height adjustment from minimum 710 mm to maximum 1,530 mm
  • Four castors each with a load capacity of 1,500 kg
  • Two drawers on each long and short side
  • Compressed air connection required
  • Color: Frame powder-coated in anthracite grey RAL 7021 with functional elements in daffodil yellow RAL 1007,
    Item number: 2338345
  • Color: Frame powder-coated in gentian blue RAL 5010 with functional elements in daffodil yellow RAL 1007,
    Item number: 2333957
  • Price: 14,800 € net plus packaging & shipping

Accessories for the welding workstation

  • Drums & electrical accessories
  • Vice & tool module
  • Document holder & PC accessories
  • Extraction hood
  • Adapter & holder

Technical features in comparison

Merkmal Beschreibung
Workstations
2 independently usable places
Media supply
Extraction as well as electricity (220/380 V) and compressed air, which run protected in the 70 mm robot protection pipe – further lines can easily be retrofitted.
Welding fume extraction
Integrated, W3-certified, automatic cleaning
Media extension
Swiveling, top-guided
Reach
Boom arms with 6-meter reach per side (4 m boom arm + 2 m suction hose) enable up to 12 meters working width – ideal for large or changing components
Footprint
< 2 m²
Commissioning
Plug-and-play, pre-assembled

Learn more about us in the video

Your contact for welding workstations

Why the SAP convinces

Two full-fledged workstations with central supply

The SAP combines two welding workstations with central supply in one module. Boom arms with 6 m reach per side enable up to 12 m working width. Ideal for large or changing components.

Ergonomic and easy welding

An optional perforated sheet module with welding equipment holders can be attached to the boom arm, providing space for tools and a power strip with fuses and FI circuit breaker. The suspended welding equipment is directly at the workplace, making handling the torch significantly easier.

No tripping hazards thanks to guided media supply

Swivel boom arms guide cables, hoses, and suction lines from above. No lines lie on the floor. This reduces accident risk and improves mobility.

Clean air during welding

The W3-certified extraction captures welding fumes directly at the source – for clean air and healthy respiratory tracts. The filter system is integrated into the module and operates without disturbing noise at the workplace. No dragging, no noise – so the extraction is actually used by employees.

No installation effort

The entire welding workstation is delivered pre-assembled and plug-and-play. After setup, simply plug in the connections for electricity, compressed air, and gas – with no additional assembly needed, the SAP is ready to use immediately.

Compact design

The welding workstation from Apfel is a compact, transportable frame construction with less than two square meters of footprint – ideal for operations with limited space or flexible manufacturing layouts. Accessories like a vise can be directly attached to the perforated HEB beams.

Contact

Looking for a compact, tidy solution for your welding shop? The welding workstation from Apfel combines technology, extraction, and organization in one module. Write to us – we are happy to advise you.

FAQ: frequently asked questions

For which applications is the SAP welding workstation suitable?
The workstation is ideal for all welding tasks with steel, particularly in confined production environments or with changing component sizes. Thanks to its two independently usable sides, it is also suitable for parallel use by two people.

Electricity, compressed air, gas, and welding fume extraction are supplied via boom arms from above. This keeps the floor clear and the workplace tidy and safe.

No, the integrated filter system features automatic cleaning. The filter performance remains consistent, and the necessary filter replacement is indicated.
The filter unit is spatially separated from the workplace and built into the module. This ensures a more pleasant working environment without disturbing noise.

Yes, the SAP welding workstation is delivered pre-assembled. After connecting electricity, compressed air, and gas, it is ready for immediate use – without additional assembly effort.

Yes, holders, devices, or tool stations can be flexibly added to the integrated perforated metal walls and beams. The boom arms can also be extended with accessories like welding equipment holders or power strips.